CERTIFICATION BODY
CEIM Certification is an independent body for certification of construction products within Civil Engineering Institute MACEDONIA It is the first accredited
certification body for construction products pursuant to the requirements of MKC EN ISO/IEC 17065:2012, which obtained its accreditation in 2016. The same year,
pursuant to the Law for construction products (Off. Gazette 104/2015) it is appointed by the Ministry for Economy of Republic of North Macedonia as product certification
body and factory production control certification body.
CEMENT
The placement of cement on the market in North Macedonia is regulated with the Law for construction products. The producers or their representatives are solely responsible for the legal compliance of their products.
The system for assessment and check of the durability performance is 1+ meaning that a product certification body needs to be engaged. In the scope of its accreditation, CEIM Certification performs certification of cements covered with the following standard:
Cement – Part 1: Composition, specifications and conformity
criteria for common cement
REINFORCING
AND PRE-STRESSING
STEEL
CEIM Certification is the only accredited body for certification of steel for the reinforcement of concrete. The system for assessment and check of the durability performance is 1+.
In the non-harmonized area, CEIM Certification performs certification of the products covered with the following standards:
Reinforcing steel-concrete - Reinforceable weldable steel - General
Reinforced concrete: bars, coils and products obtained by winding features
Prestressed steels - Part 1: General requirements, 2009
Prestressed steels - Part 2: Wire, 2009
Prestressed steels - Part 3: Ropes
Prestressed steels - Part 4: Rod, 2009
PRODUCTS AND SYSTEMS FOR
PROTECTION AND REPAIR
OF CONCRETE STRUCTURES
The MKC EN 1504 series of standards covers all the aspects of repair and/or process of protection of the concrete structures, starting with the principles of repair, precise diagnosis of the causes which lead to damage, performance requirements for the products, factory production control, evaluation of conformity. CEIM Certification for the system of assessment and check of the performance durability 2+ performs certification of products covered with the following standards.
Products and systems for protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity– Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 3: Repair of structural and non-structural elements
Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 4: A Constructive connection
Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 5: the Injection concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and level of compliance - Part 6: Steel bars and anchors
Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control, and the level of compliance – Section 7: Protection of reinforcement from corrosion
ADMIXTURES FOR
CONCRETE
The MKC EN 934 series of standards are harmonized standards defined in the requirements for conformity of the admixtures for concrete, mortar and grout which should be fulfilled before their placement on the market. injection masses that must be met before they can be placed on the market.
CEIM Certification for the system of assessment and check of the performance durability 2+ performs certification of products covered with the following standards:
Admixtures for concrete, mortar and grout – Part 2: Admixtures for concrete – Definitions, requirements, conformity, marking and labelling
Concrete, mortar and grout admixtures - Part 3: Masonry mortar additives - Definitions, requirements, assessment and marking and labeling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for prestressed cables - Definitions, requirements, conformity, marking and marking
Concrete, mortar and grout admixtures - Part 5: Sprayed concrete admixtures - Definitions, requirements, conformity, marking and marking
CONCRETE
Concrete as a construction product, pursuant to the national standard MKC 1016:2018+A1:2020, Concrete – Specification, performance, production and conformity – Rules for the use of MKC EN 206:2014+A1:2017 is classified in the system for assessment and check of the durability performance 2+. The evaluation of the conformity of the concrete is performed according to the requirements of the following standards:
Concrete – Specifications, performance, production and conformity.
Concrete – Specification, properties, production and conformity – Rules for the use of EN 206:2014+A1:2017
ASPHALT
Asphalt as construction product is susceptible to the system for assessment and check of performance 2+. The system for assessment and check of durability of the performance is provided in ZA Annexes of the series of standards from MKC EN 13108-1 to MKC EN 13108-8.
In the scope of its accreditation, CEIM Certification performs certification of cements in accordance with the following standards:
Bituminous mixtures – Material specifications – Part 1: Asphalt Concrete
Bituminous mixtures - Specifications for materials - Part 2: Asphalt concrete for very thin layers (BBTM)
Bituminous mixtures - Technical requirements for materials - Part 3: Soft asphalt
Bituminous mixtures – Materials specifications-Part 4: Hot Rolled Asphalt
Bituminous mixtures – Materials specifications-Part 4: Hot Rolled Asphalt
Bituminous mixtures - Specifications for materials - Part 5: Skeleton Asphalt (SMA)
Bituminous mixtures - Material specifications - Part 6: Mastic asphalt (molded asphalt)
Bituminous mixtures - Technical requirements for materials - Part 7: Porous asphalt
MASONRY UNITS
The masonry units as construction product are classified in a system for assessment and check of the performance durability 2+. The system for assessment and check of the performance durability is determined in ZA Annexes of the of MKC EN 771 standard series.
GIM Certification in the scope of its accreditation performs certification of masonry units in accordance with the following standards:
Specification for masonry units – Part 1: Clay masonry units
The specification of the bricklaying units – Part 2: Bricklaying units, calcium silicate
The specification of the bricklaying units – Part 3: Bricklaying units, of aggregate concrete (Dense and lightweight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
The specification of the bricklaying units – Part 5: Bricklaying units, note the stone
The specification of the bricklaying units – Part 6: the Bricklaying of the units of the natural stone
AGGREGATE AND
STONE
The aggregate as construction product is susceptible to the system for assessment and check of performance durability 2+. The system for assessment and check of the performance durability is determined in the ZA Annexes of the following standards:
Aggregates for concrete
Aggregate for bituminous mixtures and surface treatments for roads, airports and other traffic surfaces,
Aggregate for bituminous mixtures and surface treatments for roads, airports and other traffic surfaces,
Lightweight aggregates
Mortar mixtures
Mortar mixtures
Aggregates for unbound and hydraulically bound materials for use in civil engineering and road construction
Chipped-stone – Part 1: Specification
Chipped-stone – Part 1: Specification
Aggregates for railway freight
Aggregates for railway freight
MASONRY MORTAR
The masonry mortars as construction product are classified in a system for assessment and performance durability check 2+, also determined in the ZA Annex of the MKC EN 998-2 Standard. CEIM Certification performs certification of masonry mortars, according to the requirements of:
Specification for mortar for masonry – Part 2: Masonry mortar
